Embroidered Badge Short-Sleeve Crew Neck T-Shirt

Model Info

• Fabric Information:
  • 100% Cotton, 230g
  • 32-count cotton modal, delicate touch, breathable, moisture-wicking, and resistant to deformation.
• Laundry Care:
  • Cotton:
    • Wash in cold water. Avoid forceful pulling to prevent garment deformation. Do not tumble dry; air dry naturally.
    • Avoid prolonged soaking. Dilute detergent before soaking; otherwise, it may cause uneven fading.
  • Polyester:
    • Dark-colored garments may fade (surface dye) during the first wash; please wash separately or with light-colored items.
    • Use cold water for washing.
  • Printing:
    • Wash in cold water. Hand washing is recommended. Turn inside out when washing and drying to extend the life of the print. Do not expose to direct sunlight; store in a cool, shaded place to prevent the print from sticking.
    • If the print sticks, soak in cold water for 5 minutes to gently separate; do not pull forcefully.
  • Denim:
    • Dark denim fading is not a quality issue.
    • Wash jeans as infrequently as possible. If washing for the first time, add some white vinegar to the water and soak for about half an hour.
    • Use cold water (around 30°C). Hot water may cause denim to fade and shrink.
    • After washing, press out excess water and hang to dry in a ventilated area inside out. Avoid exposure to direct sunlight to prevent severe oxidative fading.
  • Knitting:
    • Pilling is not a quality issue but a technical challenge. It is recommended to purchase a fabric shaver for maintenance and minimize friction during washing and wearing.
    • Hand wash sweaters as much as possible, or use the gentle cycle on a washing machine. Turn the sweater inside out before washing.
    • Do not hang sweaters to dry, as this will cause stretching. Lay flat to dry and avoid direct sunlight.
    • Be careful when washing wool sweaters; send to a professional cleaner if possible.
    • Wool is not resistant to alkali; use neutral detergent or soap flakes for washing.
    • Knitted items will shrink in water above 30°C, so the washing temperature should not exceed 30°C; room temperature (25°C) is usually sufficient.
    • Avoid using a washboard. If using a washing machine, use a gentle cycle. Do not wash for too long to prevent shrinkage.
  • Down:
    • Wash down garments as infrequently as possible; use a damp cloth to wipe the surface. If washing is necessary, dry cleaning is preferred. Do not machine wash at home; gentle hand washing is acceptable.
    • Soak thoroughly. Add laundry detergent or silk detergent to warm water around 30°C and soak the down garment for 20 minutes to ensure the inside and outside are fully saturated.
    • Use both hands to grasp and press various parts of the down garment in the water to squeeze out the air inside. Use a soft brush to gently scrub until clean.
    • Do not wring dry after washing, as this will damage the internal down and affect warmth. Squeeze out water and lay the down garment flat on a table to dry in the shade.
  • Leather:
    • Hand wash only. Do not soak in hot water, and the water temperature must not exceed 40°C, as hot water will destroy the base fiber structure.
    • It is best not to wash with water directly. You can purchase specific cleaners for synthetic leather or wipe with a soft cloth dipped in soapy water, then wipe with warm water.
    • After washing, hang in a cool, ventilated place. Do not fold.
    • If synthetic leather is stained with oil, wipe clean with a damp cloth. Synthetic leather is not afraid of water; just wipe it clean.
    • Do not rub or collide with hard or rough objects to avoid damaging the surface coating.
    • Synthetic leather coating is thin; do not place near stoves or heaters to prevent baking the surface, and avoid contact with corrosive chemicals such as acids and alkalis.
  • General Wash Care Information:
    • Professional dry cleaning or hand washing is recommended.
    • Do not use bleaching agents. Lay flat to dry.
    • Avoid excessive pulling at the neckline. Wash in water below 40°C.
    • Avoid direct sunlight for items with prints. Avoid high-temperature ironing.
    • Items with frayed edges are a design feature, not a quality issue.